FSM-70R12 Fujikura Fusion Splicer Super Fast !!– USA MODEL

$12,950.00

FSM-70R Includes:
ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair),

FH-50-12 Fiber Holder, USB Cable, Alcohol Dispenser, Screw Driver, Sleeve Loader,

Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and

CC30 Transit Case with Carrying Strap

SKU: FSM-70R12 Category: Tag:

Description

The Fujikura 70R is equipped with a precision, fixed v-groove for splicing single fibers or ribbon fiber up to 12 fibers. Incorporating the proven ruggedized features pioneered by Fujikura, the 70R has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. A new auto-start “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 40-second shrink time for 12-fiber ribbon. The result is a total splice process time of approximately 55 seconds!  Ruggedness and durability are greatly enhanced by a mirror-less optical system and “severe-impact resistant” monitor. Battery capacity is now 110 splices/shrinks.  An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

Features:

  • Automated and programmable wind protector
  • Li-ion battery with 110 splices/shrinks per charge
  • 40-second automated tube heater
  • Fully ruggedized for shock, dust and moisture
  • On-board training and support videos
  • Internet software upgrades
  • Multi-function transit case with integrated workstation

PARAMETER VALUE

Model FSM-70R Fusion Splicer

Applicable Fibers Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655)

Fiber Count Single, 2, 4, 5, 6, 8, 10, 12

Cladding Diameter 125 μm

Coating Diameter Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm

Fiber Cleave Length 10 mm

Typical Average Splice Loss 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS;

measured by cut-back method relevant to ITU-T and IEC standards

Splicing Time Typical 15 seconds with standard single-mode fiber

Arc Calibration Method Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available

Splicing Modes 100 preset and user programmable modes

Splice Loss Estimate Based upon dual camera cladding alignment data

Storage of Splice Result Last 2000 splice results stored in the internal memory

Fiber Display X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation

Magnification 35X to 90X

Viewing Method Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating

Operating Condition 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50°C respectively

Mechanical Proof Test 1.96 to 2.25 N

Tube Heater Built-in tube heater with 30 heating modes; auto-start function

Tube Heating Time Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with Fujikura micro sleeves

Protection Sleeve Length 60 mm, 40 mm, Micro

Splice/Heat Cycles with Battery Typical 110 cycles with power save functions activated

Power Supply Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-13, 13.2V DC with BTR-08 battery

Terminals USB 1.1 (USB-B type) for PC communication, Mini-DIN (6-pin) for
hJS-02/03 and SH-8 tube heater
Wind Protection Maximum wind velocity of 15m/s (34 mph)

Dimensions 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches)

Weight 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery

Reviews

There are no reviews yet.

Be the first to review “FSM-70R12 Fujikura Fusion Splicer Super Fast !!– USA MODEL”