Description
Fujikura 70S Fusion Splicer
The Fujikura 70S is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable “auto open sheath clamps” open one sheath clamp, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 14-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhance by a mirror-less optical system and “severe-impact resistant” monitor. Battery capacity is now 200 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.
Features
- Automated and programmable wind protector
- 14-second automated tube heater
- Fully ruggedized for shock, dust and moisture
- Li-Ion battery with 200 splices/shrinks per charge
- 5 mm cleave length for splice on connector or small package needs
- Sheath clamp or fiber holder operation
- On-board training and support videos
- Internet software upgrades
- Multi-function transit case with integrated workstation
Also available are the machine only – Part # S015580 and the KIT with Cleaver, Battery and Cord – # S015591
call or email for lowest price on kits – esales@tamge.com or 207-221-315
PARAMETER
VALUE
Model
70S Fusion Splicer
Applicable Fibers
Single-mode (G.652 & G .657), Multimode (G.651), DS (G.653), NZDS (G.655)
Cladding Diameter
80 μm to 150 μm
Coating Diameter
100 μm to 1,000 μm
Fiber Cleave Length
5 to 16 mm
Typical Average Splice Loss
0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards
Splicing Time
SM FAST mode — 7 seconds; SM AUTO mode — 12 seconds; AUTO mode — 15 seconds
Arc Calibration Method
Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available
Splicing Modes
100 preset and user programmable modes
Splice Loss Estimate
Based upon dual camera core alignment data
Storage of Splice Result
Last 2,000 results to be stored in the internal memory
Fiber Display
X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation
Magnification
300X for single X or Y view, or 160X for X and Y view
Viewing Method
Dual cameras with 4.73 inch TFT color LCD monitor
Operating Condition
0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively
Mechanical Proof Test
1.96 to 2.25N
Tube Heater
Built-in tube heater with 30 heating modes; auto-start function
Tube Heating Time
Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves
Protection Sleeve Length
60 mm, 40 mm, micro
Splice/Heat Cycles with Battery
Typical 200 cycles with power save functions activated
Power Supply
Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery
Terminals
USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater
Wind Protection
Maximum wind velocity of 15 m/s. (34 mph)
Dimensions
146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)
Weight
2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery
Reviews
There are no reviews yet.