FSM-70S Fujikura Fusion Splicer KIT (W/ Cleaver) **USA Model**

$12,395.00

Fujikura 70 includes –  CT-30A Cleaver, ADC-18 AC Adapter, ACC-14 AC Cord, ELCT2-20A Spare Electrodes (pair), S70A Sheath Clamp, USB Cable, Alcohol Pot, Screw Driver, Splicer Carrying Strap, Quick Reference Guide, Video Instruction Manual and CC30 Transit Case with Carrying Strap

Description

Fujikura 70S Fusion Splicer

The Fujikura 70S is the world’s fastest and most robust core alignment fusion splicer. Incorporating the proven ruggedized features pioneered by Fujikura, the 70S has added automated and enhanced user control features to increase splicing efficiency. A user programmable, automated wind protector expedites the splicing process by automatically closing to initiate the splice process, and opening upon splice completion. Fully programmable “auto open sheath clamps” open one sheath clamp, after the tensile test, to prepare the fiber for removal. A new automated “clamshell design” tube heater applies heat to both sides of the splice protection sleeve resulting in a 14-second shrink time. The result is a total splice process time of approximately 21 seconds! Ruggedness and durability are greatly enhance by a mirror-less optical system and “severe-impact resistant” monitor. Battery capacity is now 200 splices/shrinks. An innovative transit case doubles as a built-in or mobile workstation and makes splicing easier than ever before.

Features

  • Automated and programmable wind protector
  • 14-second automated tube heater
  • Fully ruggedized for shock, dust and moisture
  • Li-Ion battery with 200 splices/shrinks per charge
  • 5 mm cleave length for splice on connector or small package needs
  • Sheath clamp or fiber holder operation
  • On-board training and support videos
  • Internet software upgrades
  • Multi-function transit case with integrated workstation

Also available are the machine only – Part # S015580 and the KIT with Cleaver, Battery and Cord – # S015591

call or email for lowest price on kits – esales@tamge.com or 207-221-315

PARAMETER

VALUE

Model

70S Fusion Splicer

Applicable Fibers

Single-mode (G.652 & G .657), Multimode (G.651), DS (G.653), NZDS (G.655)

Cladding Diameter

80 μm to 150 μm

Coating Diameter

100 μm to 1,000 μm

Fiber Cleave Length

5 to 16 mm

Typical Average Splice Loss

0.02 dB with SM, 0.01 dB with MM, 0.04 dB with DS, 0.04 dB with NZDS, measured by cut-back method relevant to ITU-T and IEC standards

Splicing Time

SM FAST mode — 7 seconds; SM AUTO mode — 12 seconds; AUTO mode — 15 seconds

Arc Calibration Method

Automatic, real-time and by using results of previous splice when in AUTO mode, manual arc calibration function available

Splicing Modes

100 preset and user programmable modes

Splice Loss Estimate

Based upon dual camera core alignment data

Storage of Splice Result

Last 2,000 results to be stored in the internal memory

Fiber Display

X or Y, or both X and Y simultaneously. Front or rear monitor display options with automated image orientation

Magnification

300X for single X or Y view, or 160X for X and Y view

Viewing Method

Dual cameras with 4.73 inch TFT color LCD monitor

Operating Condition

0 to 5,000 m above sea level, 0 to 95%RH and -10 to 50°C respectively

Mechanical Proof Test

1.96 to 2.25N

Tube Heater

Built-in tube heater with 30 heating modes; auto-start function

Tube Heating Time

Typical 14 seconds with FP-03 sleeve, 17 seconds with FP3 (40), 5-16 seconds with Fujikura micro sleeves

Protection Sleeve Length

60 mm, 40 mm, micro

Splice/Heat Cycles with Battery

Typical 200 cycles with power save functions activated

Power Supply

Auto voltage selection from 100 to 240 V AC or 10 to 15 V DC with ADC-18, 14.8 V DC with BTR-09 battery

Terminals

USB 1.1 (USB-B type) for PC communication. Mini-DIN (6-pin) for HJS-02/03 and SH-8 tube heater

Wind Protection

Maximum wind velocity of 15 m/s. (34 mph)

Dimensions

146 W x 159 D x 150 H (mm) / 5.75 W x 6.25 D x 5.9 H (inches)

Weight

2.5 kg (5.5 lbs) with AC adapter ADC-18; 2.7 kg (5.95 lbs) with BTR-09 battery

 

Reviews

There are no reviews yet.

Be the first to review “FSM-70S Fujikura Fusion Splicer KIT (W/ Cleaver) **USA Model**”