Fusion Splicers
		SpliceMateTM FSM-11R & FSM-11S Fusion Splicers The SpliceMate (FSM-11) is the world’s smallest and most portable fusion splicer, designed to meet the challenges posed by today’s fiber networks. Fitting in the palm of your hand, the SpliceMate is smart and reliable enough to be used with confidence by inexperienced operators. SpliceMate’s advanced intelligence features include dual-camera fiber inspection to insure the splice is right, and auto arc calibration...an industry first. It’s easy to operate and quickly makes low loss splices with all common types of optical fibers up to 4-fiber ribbons. The SpliceMate is available with a variety of powering options including a battery pack and adapters to work with AC or DC power sources. A workstation, specifically designed for the SpliceMate, is available for simplified splicing in the field. Whether splicing on a pole, in a bucket, or in a neighborhood...SpliceMate is the splicer to have along on the job! Available with kit and portable workstation. Features: • Highly portable • Dual camera inspection • 3.5” dual direction monitor • Single or 4-fiber versions available • 40 second tube heater • Auto arc calibration • 30 mph wind protector
		FSM-17S Fusion Splicer The FSM-17S establishes a new standard for single fiber “fixed v-groove” type fusion splicers with a host of improvements including a 35 second tube heater, dual position monitor, and a longer battery life. The real time arc calibration feature makes field maintenance easier than ever. Also available now is a version of the FSM-17S utilizing a fiber holder system, making the splicing process extremely simple for inexperienced technicians. The FSM-17S is well suited for FTTX applications and both models quickly attach to the newly redesigned ASW-02 workstation making, field portability a breeze. Features: • 35 second tube heater • Dual direction monitor position • Long life battery (up to 160 splices/shrinks per charge) • Automatic arc calibration • Available in either sheath clamp or fiber holder models
		FSM-50S Fusion Splicer The FSM-50S Fusion Splicer sets the standard for core alignment fusion splicers. The FSM-50S is the fastest field splicer available, and completes a splice and tube heat in a total of 44 seconds. Special features include its small size and weight - the smallest in the industry - and the legendary ruggedness Fujikura is known for. The FSM-50S also includes user-friendly features such as calibration-free arc adjustments, automatic fiber type identification and reduced operational steps. The FSM-50S also offers increased flexibility for various splicing tasks with user-selectable front and back monitor positioning. Features: • Automatic core to core, low-loss splicing regardless of fiber quality or age • 9-second splicing time • 35-second heat time (60mm sleeve) • Dual, user selectable monitor position • Excellent visibility in bright sunlight with 5.6” TFT Color LCD displa • Automatic arc calibration • Long life battery (up to 160 splice/shrink cycles per charge)
		FSM-17R Fusion Splicer The FSM-17R establishes a new standard for up to 4-fiber “fixed v-groove” ribbon splicing. The unit includes a host of valuable features including fast performance, dual position monitor, and extremely long battery life. The real-time arc calibration feature makes field maintenance easier than ever. The FSM-17R is well-suited for FTTx applications, and quickly attaches to the ASW-02 workstation, making field portability a breeze in the most challenging of aerial or terrestrial splicing environments. Features: • 40 second tube heater • Dual direction monitor position • Long life battery (up to 140 splices/shrinks per charge) • Automatic arc calibration
		CT-30 Cleaver The FSM-17R establishes a new standard for up to 4-fiber “fixed v-groove” ribbon splicing. The unit includes a host of valuable features including fast performance, dual position monitor, and extremely long battery life. The real-time arc calibration feature makes field maintenance easier than ever. The FSM-17R is well-suited for FTTx applications, and quickly attaches to the ASW-02 workstation, making field portability a breeze in the most challenging of aerial or terrestrial splicing environments. Features: • 40 second tube heater • Dual direction monitor position • Long life battery (up to 140 splices/shrinks per charge) • Automatic arc calibration
Noyes Test & Inspection
		M200 OTDR The Noyes M200 from AFL Telecommunications offers unmatched OTDR capabilities in a handheld package weighing less than 1 kg (2 lb). Multimode, Single-mode, and ‘Quad’ wavelength models are offered. With short dead zone and intermediate range specifications, the M200 is ideal for Tier 2 testing of premises (building and campus) networks or certification and troubleshooting of FTTX PON networks. And its bright, transflective display makes it suitable for both indoor and outdoor operation. The M200 is based on a new hardware/software platform that supports automatic and manual setup, precision event analysis, dual-wavelength testing, fiber identification using Noyes ‘TR’ test receivers, rich file naming and folder setup, 6 hour battery life, internal and removable media data storage, and USB connectivity. Test ports are equipped with tool-free adapters, which can be changed in seconds. A custom-designed polycarbonate case and shock-absorbing boot make it our most rugged OTDR ever. Results are saved as industry standard .SOR files, which can be viewed, printed, and analyzed on a PC using free-ware available to you and your customers (go to www.afltele.com to download). Unit firmware, user settings, and test results are saved in non-volatile memory. Thus the M200 may be stored with battery removed for an extended period of time and still be up and running in seconds when needed. Features: • Handheld, 0.9 kg (2 lb) • 850/1300/1310/1550 nm • 1.5 m (typ.) event dead zone • 22 dB (MM), 26 dB (SM) dynamic range • Integrated VFL (650 nm) • Tool-free, switchable adapters (ST/SC/FC) • Bellcore (GR-196) .SOR file format • CompactFlash™ memory card • Tool-free LiIon battery (6 hour life) • Transflective (indoor/outdoor) touchscreen display Applications: • Tier 2 testing of premises networks • FTTX PON certification and trouble-shooting • Fast fault location • Splice verification • Network documentation
		OFI 200 Optical Fiber Identifier Noyes Optical Fiber Identifiers are rugged, handheld, and easy-to-use fiber optic test instruments designed to detect optical signals transmitted through a single-mode fiber without disrupting traffic. During installation, maintenance, rerouting, or restoration; it is often necessary to isolate a specific fiber. By simply clamping an Optical Fiber Identifier onto a gently bent fiber, the unit will indicate if there is [No Signal], [Tone], or [Traffic] and identify signal direction. The OFI 200 model Identifier is equipped with a unique two-position head design that can be configured to work with 250 µm, 900 µm, ribbon, or jacketed fiber in seconds, without tools or adjustments. When testing coated fibers, the slim design of the OFI 200 model allows easier access on a splice tray where the amount of work space is limited. The clamping trigger is ergonomically designed to fit the natural motion of the operator’s hand. A high impact molded plastic case makes the OFI 200 model suitable for use outside plant or in the central office. The OFI 200 model Identifier is battery operated with the battery indication feature and performs thousands of tests before batteries replacement is necessary. Features: • Rugged, handheld, lightweight • Accepts 250µm and 900µm coated fiber, 3mm jacketed fiber cable, and ribbon fiber • No head swapping or adjustments • Identifies light carrying fiber • Low insertion loss - traffic remains uninterrupted • Indicates direction of traffic • Indicates Tone signal visually and audibly • 2kHz Tone detection • Battery operated • Low battery indication • Low cost, easy to use Applications: • Live fiber identification - used during installation, maintenance, rerouting, or restoration to positively identify fibers prior to cutting and splicing • Tone detection
Fiber Management
		LightLinkTM Poli-MOD Pigtailed Optical LightLink Interconnect Module The Noyes M200 from AFL Telecommunications offers unmatched OTDR capabilities in a handheld package weighing less than 1 kg (2 lb). Multimode, Single-mode, and ‘Quad’ wavelength models are offered. With short dead zone and intermediate range specifications, the M200 is ideal for Tier 2 testing of premises (building and campus) networks or certification and troubleshooting of FTTX PON networks. And its bright, transflective display makes it suitable for both indoor and outdoor operation. Features: • Handheld, 0.9 kg (2 lb) • 850/1300/1310/1550 nm • 1.5 m (typ.) event dead zone • 22 dB (MM), 26 dB (SM) dynamic range • Integrated VFL (650 nm) • Tool-free, switchable adapters (ST/SC/FC) • Bellcore (GR-196) .SOR file format • CompactFlash™ memory card • Tool-free LiIon battery (6 hour life) • Transflective (indoor/outdoor) touchscreen display Applications: • Tier 2 testing of premises networks • FTTX PON certification and trouble-shooting • Fast fault location • Splice verification • Network documentation
		XFM Optical Cassettes The XFM Optical Cassettes are a family of preterminated fiber modules, chassis, cables and patch cords that streamlines the deployment of optical network infrastructure in an incremental growth platform. The modules and chassis are available in industry standard LGX® format in 1RU through 4RU configurations and offer higher density with a decreased footprint. Features: • 12- and 24-port configurations • Modular design • Single LGX® slot packages with up to 12 terminations • Available with SC, LC, ST, FC and MTRJ connector types • Compatible with all LANSystem™, CPS and IBX chassis platforms • Available as MTP rear connection, pigtailed with OFNR or pretermed • GR-445B and GR-2866 transitions • Multimode and single-mode versions Applications: • LAN, WAN and SAN • Interoffice cross-connects • Campus environments
Optical Connectivity
		FAST Connection The Field Master™ Connectors for field termination of fiber optics feature high precision, high reliability and low applied connector cost. Durable metal components, industry-standard connector designs, and proven crimp technology give the customer peace-of-mind that their installed network is steady and reliable. Field Master™ Tool Kits come complete with all necessary tools and consumables for the professional installation of AFL’s Field Master™ Connectors. Features: • High precision ceramic ferrules insure fiber alignment and repeatable performance. • Rugged metal connector bodies provide sturdy cable terminations. • Industry standard interfaces allow interoperability with media equipment. • Meets EIA/TIA 568A performance requirements. • Field proven crimp technology improves connector/cable tensile performance. Applications: • Premise environments • Desk for LAN environments • Patch panels • Direct equipment termination • Fiber to the Subscriber (FTTx) applications • Repair / replacement requirements
		Bend Insensitive Cable Assemblies AFL single-mode Bend insensitive cable assemblies are manufactured with precision depressed clad single-mode fiber enabling tight bend radii and routing characteristics. Available in simplex, duplex, quad (4-fiber) and octo (8-fiber) cable configurations. Assorted standard connector interfaces options are designed to meet Telcordia GR-326 performance requirements. Both UPC (ultra-polish) and APC (angled polish) interfaces meet low insertion loss and high return loss system requirements. Features: Connectors • Color-coded blue cable jacket identifies enhanced performance • Premium performance at standard grade prices • Tested in accordance with Telcordia GR-326, issue 3 specifications • Meets connector interface specifications of EIA.TIA-455 (FOCIS) • All component materials are compliant to UL94 V-0 • Ceramic ferrule utilized for precision fiber alignment • Ribbed boot design on SC insures protected cable bending • 40 degree LC boot option allows guided cable routing in DMX and DMXtend system applications Cable • Fujikura fiber enables tight bend radius control and low loss • Cable constructions meet or exceed Telcordia GR-409 • Simplex, Duplex Dual-link, Quad and 8-fiber cable constructions are RoHS compliant Applications: • Service providers networks • Central office and Equipment buildings • CATV carrier video systems